Safety Instructions For The Battery Pack - Alber Erivo R10 Gebrauchsanweisung

• The charger must not be used by young children.
• The charger is designed to operate only with mains alternating voltage of 100 V to 240 V.
• Never attempt to dismantle or modify the charger.
• Do not cover the charger during the charging process or place any objects on top of the device.
• Never subject the cable or plug to any pressure. Overstretching or bending the cable, pinching cables between a wall and a window
frame or placing heavy objects on a cable or a plug may result in electric shock or fire.
• Never connect the terminals of the plug [23] on the charger cable to any metallic objects.
• Ensure that the mains plug is firmly inserted in the socket.
• Do not touch the mains plug or the charger cable plug with wet hands.
• Do not use the plug of the charger and/or the mains plug if they are wet or dirty. Before plugging them in, clean the plugs using a dry
cloth.
• Once the charging process is complete, first disconnect the charger plug from the socket and then disconnect the charging plug from
the socket on the battery pack.
• Ensure that no moisture can get into the socket [14] on the battery after disconnecting the charger.
• Store the charger in a dry, well ventilated environment.
• The charger must not be stored in places where it is exposed to direct heat sources, humidity, water, oil, acids or alkalis, or in places
where ozone could potentially be generated.
16
The chargers supplied by Alber may only be used to charge the battery pack of the Erivo. The chargers must not
be used to charge other batteries under any circumstances.
Before and after charging, ensure that the charger adapter [24] and the socket [14] on the battery pack are
clean and that there are no metallic particles on them. If there are any metallic particles, these must be removed
with a clean, dry cloth.

4.7. Safety instructions for the battery pack

• Before the Erivo is used for the first time, the battery pack should be fully charged.
• The Erivo must only be used at temperatures between -25 °C and +50 °C.
• Never charge the battery pack at temperatures under 0 °C or over 40 °C.
• The battery pack must not be exposed to heat (e.g. radiators) or fire. External heat exposure can lead to the battery pack exploding.
• In the (unlikely) event of the battery pack overheating or catching on fire, you must ensure that the battery pack does not come into
contact with water or other liquids. The only suitable extinguishing agent that is recommended by the cell manufacturers is sand.
• Your Erivo consumes energy each time you use it. Therefore, if possible, fully charge the battery pack after every use.
• The battery pack housing must not be opened or taken apart. Improper opening or wilful destruction carries a danger of serious injury.
In addition to this, opening the battery will void any warranty claims.
• Never connect the battery pack socket [14] to metallic objects, and ensure that the contacts do not come into contact with metallic
objects (for example with metal filings).
• If the socket [14] is dirty, clean it with a clean, dry cloth.
• Never immerse the battery pack in water.
• If damaged or defective, the battery pack must be checked. Please contact your specialist dealer to learn about the proper procedure
that must be used for returns and repairs (see also chapter 4.9).
• If the battery pack is defective or damaged, you must not use the Erivo under any circumstances. Contact your specialist dealer about
a repair.
• Always ensure that the battery pack is kept clean and dry.