Transport And Positioning - Abicor Binzel ABICAR ADVANCED 42V Originalbetriebsanleitung

ABICAR ADVANCED 42V
Tab. 1
Adjustment range of guide arm
Horizontal speed
Vertical speed
Weight
Tab. 2
Ambient temperature
(operation, storage in a closed environment)
Ambient temperature (transport)
Relative humidity

5 Transport and positioning

Risk of injury resulting from improper transportation and positioning
In the event of improper transportation and positioning, the device could topple over or fall. This may
result in serious injuries.
► Check and wear your personal protective equipment.
► Place the device on a suitable base (flat, solid, dry) on which it will not topple over.
► Note the weight of the device when lifting it.
► Avoid abrupt lifting and setting down.
► Do not lift the device over persons or other devices.
NOTICE
Material damage resulting from improper transportation and positioning
Weather conditions can cause irreparable damage to the device.
► Protect the device against weather conditions, such as rain and direct sunlight.
► Convey the device to the desired work area using its handle.
► Ensure clear access to the control elements and connections.
► To ensure a clean weld seam, ensure that the surface is clean and flat.
General information
Ambient conditions, transport, storage and operation
WARNING
 4.3 Technical data on page EN-12
5 Transport and positioning
0 to 100 mm
0 to 110 cm/min
0 to 100 cm/min
8 kg
−10°C to +40°C
−25°C to +55°C
Up to 90% at +20°C
EN - 13