Residual Risks; Operation; Attaching/Replacing Accessories - Parkside PGSA 12 A1 Originalbetriebsanleitung

GB
or switched off before removing
jammed clippings or main-
taining the grass shears.Unexpec-
ted operation of the grass shears when
removing jammed material can lead to
serious injuries.
f) Hold the grass shears by the
handgrip when the blade is at
a standstill and make sure you
do not press the switch.Carrying­
the grass shears correctly reduces the
risk of inadvertent operation and being
injured by the blade as a result.
g) Always place the protective co-
ver onto the blades while trans-
porting or storing the grass
shears. Careful­handling­of­the­grass­
shears reduces the risk of injury from
the blade.
ADDITIONAL SAFETY
INSTRUCTIONS
a) Search the work area for fo-
reign objects, e.g. debris and
hidden pipes.
b) Hold the grass shears properly.
c) Work with the device at ground
level. Do not work on ladders
or other unstable surfaces.

Residual risks

Even if properly operating and handling this
electric tool, some residual risks will remain.
Due to its construction and build, this electric
tool may present the following hazards:
a)­­ Cuts
b) Ear damage if working without ear
protection.
c) Eye damage if suitable eye protection
is not worn.
d) Damage to your health caused by
swinging your hands and arms when
30
operating the appliance for longer pe-
riods of time or if the unit is not held or
maintained properly.
Warning! During operation, this
electric tool generates an electro-
magnetic­field­which,­under­certain­
circumstances, may impair the func-
tionality of active or passive medical
implants. To reduce the risk of seri-
ous or lethal injuries, we recommend
that persons with medical implants
consult their doctor and the manu-
facturer of their medical implant
before operating the machine.

Operation

Keep to noise abatement regula-
tions and other by-laws.
Attaching/replacing­
accessories
Switch off the device and
remove the rechargeable
battery before attaching or
replacing accessories in order
to avoid hazards and injury.
Attaching accessories
1. Put the grass cutting blade (12) or the
bush cutting blade (10) onto the plug-in
connector (14) on the bottom side of
the device head (1).
2. Press the accessory into the direction of
the device head (1).
It will lock into place audibly.
Removing accessories:
3. Press the release buttons (8) on the
device head (1) and remove the acces-
sories (10/12).