Herunterladen Inhalt Inhalt Diese Seite drucken

Residual Risk; Operation; Before Starting Up; Mounting - Parkside PDST 10 A1 Originalbetriebsanleitung

Druckluft-schlauchtrommel
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 5
Never transport the hose drum by
z
taking it by the hoses.
Always hold the hose firmly
z
when you disconnect it from
the compressed air source or a
pneumatic tool.

Residual risk

z
z
Even if you operate the device as
intended, there will be residual risks.
The following dangers may occur in
connection with the build and design
of this air-driven hose drum:
Danger from beating compressed
z
air hoses.
Danger of falling from com-
z
pressed air hoses lying around.
Reduce the residual risk by carefully
using the device as intended.
292166_Schlauchtrommel_content_LB8.indb 19
All manuals and user guides at all-guides.com
Safety instructions for pneumatic tools / Operation

Operation

Before starting up

z
z
z
Take all parts from the packaging and check
whether the air-driven hose drum or parts show
any damage. If this is the case, do not use the
air-driven hose drum. Contact the manufacturer
via the indicated service address.
z
Remove all protective films and other transport
packaging.
z
Check that the delivery is complete.

Mounting

z
z
Finding a mounting spot
z
Mount the hose drum on a suitable ceiling or
wall; use of the unmounted hose drum is not
permitted.
z
Choose a place for mounting the hose drum so
that it does not pose any obstacle.
z
Ensure a mounting height of at least 2.5 metres
for ceiling installation.
z
You need the following tools for mounting: a
power drill, a suitable drill bit and a wrench.
Mounting the hose drum
DANGER OF INJURY!
Improper mounting of the hose drum may cause
injury.
z
Ensure that there are no lines or tubes at the
mounting site. Use a detector for this if neces-
sary or contact a specialist.
z
Observe the safety notes for the drill used.
NOTE! Danger of damage!
Improper mounting may cause damage.
z
Ensure that the carrier material at the mounting
site bears the weight of the hose drum. Contact
a specialist if you have any questions.
19
GB/IE/NI
11.12.2017 13:36:10

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis