Wall Mounting; Waste Disposal And Environmental Protection - Parkside PKS 1600 B2 Originalbetriebsanleitung

GB MT
location and out of reach of children.
• The combination wrench (12) can be
stowed in the device for storage. See
illustration .

Wall mounting

You can hang it on the wall with the key-
hole bore (28) on the bottom of the device.
• Using dowels, place one screw at the
desired position on a wall.
• The screw head can have a diameter of
approx. 10 mm.
• Leave the screw head protruding at a dis-
tance of approx. 10 mm from the wall.
• You can place the device onto the screw
using the opening on the bottom and
pull the device down until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to fi nd these or consult an in-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
fi re. Contact with a gas line
can result in an explosion.
Damage to a water line can
lead to property damage and
electric shock.
50
Waste disposal and en-
vironmental protection
Empty the oil tank carefully. Do not dispose
of used oil in the sewage system or drains.
Dispose of used oil in an environmentally
correct manner - bring it to a waste dis-
posal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre when you have fi nished with them.
Machines do not belong with do-
mestic waste.
Directive 2012/19/EU on waste electrical
and electronic equipment: Used electrical
devices must be collected separately for
disposal and recycled in an environmental-
ly sound manner.
Depending on the implementation in national
law, you may have the following options:
• Return to a shop:
Food retailers with a total sales area
of at least 800 square metres that offer
electric and electronic devices multiple
times a year or permanently and distri-
bute them on the market are obligated
to take back old electric and electronic
devices at no charge. When handing a
new electric or electronic device to an
end user, they have to take back an old
device of the same kind from the end
user that essentially fulfi ls the same func-
tions as the new device at the site of han-
dover or in the immediate vicinity at no
charge as well as take back up to three
old devices per device type with external
dimensions no larger than 25 centimetres
in the retail shop or the immediate vici-
nity at no charge without the purchase
of an electric or electronic device at the
request of the end customer.