Wall Mounting; Waste Disposal And Environmental Protection - Parkside PKS 1600 B2 Originalbetriebsanleitung

GB
location and out of reach of children.
• The combination wrench (12) can be
stowed in the device for storage. See
illustration .

Wall mounting

You can hang it on the wall with the key-
hole bore (28) on the bottom of the device.
• Using dowels, place one screw at the
desired position on a wall.
• The screw head can have a diameter of
approx. 10 mm.
• Leave the screw head protruding at a dis-
tance of approx. 10 mm from the wall.
• You can place the device onto the screw
using the opening on the bottom and
pull the device down until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to find these or consult an in-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
fire. Contact with a gas line
can result in an explosion.
Damage to a water line can
lead to property damage and
electric shock.
50
Waste disposal and en-
vironmental protection
Empty the oil tank carefully. Do not dispose
of used oil in the sewage system or drains.
Dispose of used oil in an environmentally
correct manner - bring it to a waste dis-
posal center.
Be environmentally friendly. Return the tool,
accessories and packaging to a recycling
centre­when­you­have­finished­with­them.
Machines do not belong with do-
mestic waste.
Directive 2012/19/EU on waste electrical
and electronic equipment: Consumers are
legally obliged to recycle electrical and
electronic equipment in an environmentally
sound manner at the end of its life. In this
way, environmentally friendly and resour-
ce-saving recycling is ensured.
Depending on the implementation in na-
tional law, you may have the following
options:
• Return to a shop,
•­ Hand­over­to­an­official­collection­point,
• Return to the manufacturer/distributor.
This does not affect accessories enclosed
with the old devices or tools without any
electrical components.