Technical Data; Unpacking - Scheppach HSM3500 Original Bedienungsanleitung

• Risk to health from dust. Wear personal protection
equipment such as eye protection without fail.
• Injuries due to defective diamond cutting disc. The
diamond cutting disc must be checked regularly for
physical integrity.
• Risk of injury to fingers and hands during cutting
disc replacement. Wear appropriate working gloves.
• Risk of injury during machine activation from sud-
den start of cutting disc.
• Risk from power while using improper electric con-
necting cables.
• Risk to health from running cutting disc due to long
hair and loose clothing. Wear personal protection
equipment like hair net and tight-fitting working
clothes.
• Even after taking all the necessary precautions, not
apparent residual risks cannot be ruled out com-
pletely.
• Residual risks can be minimized if the „safety in-
structions" and the „proper use", as well as operat-
ing instructions manual are observed jointly.

6. Technical data

Production dimensions
L x W x H
Cutting table
Diamond cutting wheel
Hole
Speed
Weight
Max. cutting length
Max 90° cutting height
Max. 45° cutting height
Motor
Power intake
Operating mode*
Insulating material class
Protection type
Technical changes reserved!
1150 x 520 x 1210 mm
535 x 430 mm
ø 360 mm
ø 25,4 mm
2800 1/min
72 kg
700 mm
110 mm
72 mm
230 V~ / 50 Hz
2200 W
S6 40%
B
IP54
www.scheppach.com
*Operating mode – S6 40%
Operating mode S6 is a uninterrupted, periodic mode.
The mode comprises of a start-up period, a time with
constant load and an idle time. The operating time is
10 mins, the relative duty cycle is 40% of the operating
time.
Noise characteristic values
Noise at the workplace can exceed 85 dB (A). In this
case, noise protection measures are necessary for the
user (wear hearing protection!).
Noise output level in dB
Sound pressure L
pA
Sound power L
wA
Uncertainty K
pA
7.

Unpacking

m ATTENTION!
The device and packaging materials are not toys!
Children must not be allowed to play with plastic
bags, film and small parts! There is a risk of swal-
lowing and suffocation!
• Open the packaging and carefully remove the de-
vice.
• Remove the packaging material, as well as the pack-
aging and transport safety devices (if present).
• Check whether the scope of delivery is complete.
• Check the device and accessory parts for transport
damage. In the event of complaints the carrier must
be informed immediately. Later claims will not be
recognised.
• If possible, keep the packaging until the expiry of the
warranty period.
• Familiarise yourself with the product by means of the
operating manual before using for the first time.
• With accessories as well as wearing parts and re-
placement parts use only original parts. Replace-
ment parts can be obtained from your dealer.
• When ordering please provide our article number as
well as type and year of manufacture for the product.
72 dB(A)
82 dB(A)
3 dB
GB | 31