Introduction; Layout; Delivery Scope; Proper Use - Scheppach HSM3500 Original Bedienungsanleitung

1.

Introduction

Manufacturer:
Scheppach GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We hope your new tool brings you much enjoyment
and success.
Note:
As per the applicable Product Liability Law, the man-
ufacturer of this device will not be liable for damages
that occur in this device or that are caused by this de-
vice in the following cases:
• Improper handling,
• Non-observation of the operating instructions,
• Repair by third parties, unauthorized technicians,
• Installation and replacement with non-original spare
parts,
• Use not in conformity with the manufacturer's spec-
ifications,
• Failures of the electrical system attributable to
non-observation of the electrical specifications and
VDE clauses 0100, DIN 57113 / VDE0113.
We recommend the following:
Read through the complete text in the operating in-
structions before installing and commissioning the de-
vice. The operating instructions are intended to help
the user to become familiar with the machine and take
advantage of its application possibilities in accordance
with the recommendations. The operating instructions
contain important information on how to operate the
machine safely, professionally and economically, how
to avoid danger, costly repairs, reduce downtimes and
how to increase reliability and service life of the ma-
chine.
In addition to the safety regulations in the operating
instructions, you have to meet the applicable regula-
tions that apply for the operation of the machine in your
country. Keep the operating instructions package with
the machine at all times and store it in a plastic cover
to protect it from dirt and moisture. Read the instruc-
tion manual each time before operating the machine
and carefully follow its information. The machine can
only be operated by persons who were instructed con-
cerning the operation of the machine and who are in-
formed about the associated dangers.
26 | GB
The minimum age requirement must be complied with.
In addition to the safety notices contained in this op-
erating manual and the particular instructions for your
country, the generally recognised technical regula-
tions for the operation of identical devices must be
complied with.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions and
the safety information.

2. Layout

1. Saw blade protection
2. ON/OFF switch
3. Handle on the cutting arm
4. Machine head
5. Motor
6. Roll slide with rubber coating
7. Stop rail with scale
8. Tub
9. Guide rails
10. Transport handle
11. Feet
12. Base frame
13. Longitudinal aligning stop
14. Diamond cutting wheel (Fig 3.2)
15. Spray guard
16. Water shut-off valve
17. Spring
18. Water pump (Fig. 3.1)

3. Delivery scope

• Stone and tile cutter
• Roll slide with rubber coating
• Diamond cutting wheel (Fig. 3.2)
• Lengthwise aligning stop
• Open-ended spanner and Allen key

4. Proper use

The machine may only be used in the intended manner.
The machine corresponds to the valid EU Machine
Directive
• Before starting work, all the protection- and safety
devices must be installed on the machine.
• The machine is designed for operation by one per-
son. The operator will be responsible for the pres-
ence of third persons in the work area.
www.scheppach.com