Troubleshooting; Technical Data; Repairs; Environmental Protection - Scheppach multi cut 5 Originalbetriebsanleitung

11. Troubleshooting

Error
Very high spark generation
High wear on certain parts of
the saw blade
Saw blades fracture
Teeth br

12. Technical data

Voltage:
Frequency:
Rating:
Idling speed:
Disc diameter:
Max. cutting depth :
Work cycle for wood/plastic/
aluminium/non-ferrous metal:
30 min. operating time – 10 minutes break
Work cycle for steel:
10 min. operating time – 10 minutes break
Sound pressure level L
PA
Sound power level L :
WA
Uncertainty:
Vibration:
Uncertainty:
The noise level may exceed 85 dB (A) at the work-
place.
Wear ear protection at all times.
Cause
Defective teeth on the saw blade
Feed speed too low
Blunt saw teeth
Feed speed too high
Damaged teeth
Blunt teeth
Cut is not parallel or perpendicular
to the working surface
Damaged teeth
Feed speed too high
Blunt teeth
Saw blades bent
Saw blades burned
Feed speed too high
The material being cut is too hard
Teeth damaged by excessive force
Saw blades incorrec
Saw blades burned
230 V~
50 Hz
900 W
-1
5200 min
125 mm
30 mm
: 95 dB(A)
106 dB(A)
3 dB(A)
2
5.73 m /s
2
/s
1.5 m
Solution
Fit new saw blades
Increase feed speed
Fit new saw blades
Reduce feed speed
Fit new saw blades
Fit new saw blades
Keep the saw parallel to the working
surface
Fit new saw blades
Reduce feed speed
Fit new saw blades
Fit new saw blades
Fit new saw blades
Reduce feed speed
Replace saw blades
Replace saw blades
ted Replace saw blades and follow the
Replace saw blades

13. Repairs

Use only the accessories and spare parts recom-
mended by the manufacturer. If the machine
su ers a failure despite our quality controls and
your care, have repair work carried out only by an
authorised electrician.

14. Environmental protection

Do not simply dispose of the machine, accessories
and packaging in the dustbin, instead send it for
recycling.
This small e ort will help our environment.
ctions precisely
23