General Notes On Safety; Working With The Equipment; Fitting; Screwing On The Base - Parkside PTL 4 B4 Originalbetriebsanleitung

GB
Help symbols with information on
improving tool handling.

General notes on safety

• This appliance is not intended for use
by persons (including children) with
reduced physical, sensory or mental
capabilities, or lack of experience and
knowledge, unless they have been giv-
en supervision or instruction concern-
ing use of the appliance by a person
responsible for their safety.
• People who are unfamiliar with the op-
erating instructions are not permitted to
use the equipment. The operation of the
equipment is not authorised for people
under the age of 16.

Working with the equipment

CAUTION. pressure washers
can be dangerous if they are
not operated correctly! The
jet must never be directed at people, ani-
mals, electric equipment con-nected to the
power supply or against the actual pres-
sure washer.
• Do not direct the jet at yourself or oth-
ers in order to clean clothes and shoes.
• Do not operate the pressure washer
when other people are in the immedi-
ate vicinity, other than they are also
wearing protective clothes.
• Take appropriate measures to keep chil-
dren away from the equipment whilst it
is running. .
• Do not use the equipment in the vicinity
of flammable liquids or gases. Non-
observance will result in a risk of fire or
explosion.
• Store the equipment in a dry place and
out of reach of children.
12
• Children should be supervised to en-
sure that they do not play with the ap-
pliance.
• Follow the security tips of your high-
pressure washer.
• The operator or user is responsible for
any accidents or personal injury and/
or material damage to third parties or
their property.
Caution! To avoid damage to the
equipment and any possible person
injury resulting from this:
• Do not use for cleaning windows.
• Do not work with damaged or incom-
plete equipment, or with equipment
that has been converted without the ap-
proval of the manufacturer.
• Protect the patio cleaner from frost
• Use only original accessories and do
not carry out conversion work on the
equipment.

Fitting

Screwing on the base

Screw on the base (14) to the thread sock-
et on the handgrip (11).
Tighten the base solely by hand.
Connecting the high-
pressure hose
• Insert the connection for the telescopic
tube (18) into the connection for the
high-pressure hose (12) on the hand-
grip (11). It will lock into place.
To release the high-pressure hose
(17), press the unlocking mecha-
nism for the high-pressure hose
(13). Pull away the high-pressure