Technical Specifications; Package Contents; Safety Instructions For Pneumatic Tools; Danger Of Injury - Parkside PDRP 6.2 A1 Originalbetriebsanleitung

Technical specifications

z z
Working pressure:
Volumetric flow rate:
Sound parameters per EN 14462
Sound pressure level
(Lpa):
Sound power level
(Lwa):
Loss K
Weight:
Compressors:
Compressed air con-
nection:
Max. water
temperature:
Tank volume:
Outlet system

Package contents

z z
1 pneumatic cleaning gun
1 set of operating instructions
SAFETY INSTRUCTIONS FOR
PNEUMATIC TOOLS
PLEASE READ THROUGH
THE OPERATING INSTRUC-
TIONS CAREFULLY BEFORE USE.
THESE FORM PART OF THE
PRODUCT AND MUST BE AVAILABLE
AT ALL TIMES!
When pneumatic tools are used,
basic safety precautions must be
taken in order to avoid the risk
Introduction/Safety instructions for pneumatic tools
max. 6.2 bar
3–4.5 l/min
75 dB(A)
85 dB(A)
2.5 dB(A)
0.465 kg
from 24 l tank volume
¼" (6.35 mm)
30°C
1000 ml
Rotating Nozzle
of fire, electric shock or personal
injury.
Before first using the product,
please ensure you read and follow
these operating instructions in full
and keep them in a safe place.The
manufacturer accepts no liability for
losses, damage or personal injury
caused by a failure to follow these
operating instructions.
The dangers stated are foreseeable
when using handheld pneumatic
tools for general-purpose work.
However, users must themselves
consider the risks that can occur
when using the equipment for a
specific application.

DANGER OF INJURY!

Switch off the compressed air supply
before changing tools and settings or
performing maintenance.

EXPLOSION HAZARD!

Never use petrol or other
„ z
flammable liquids to clean the
pneumatic device!Residual fumes
in the pneumatic device could be
ignited by sparks and cause the
pneumatic device to explode.Do
not work with the device in explo-
sion hazard areas where combus-
tible liquids, gases or dusts are
GB/IE/NI 7