InPro 7250 Series
2.4
Correct disposal of the sensor
When the sensor is finally removed from service, observe
all local environmental regulations for proper disposal.
(see also 4.7 Environmental protection)
2.5
Examples of some typical
applications
Below is a list of examples of typical fields of application
for the conductivity sensors. This list is not exhaustive.
Measurement in liquids:
– Industrial waste water
– Salinity and brine measurements
– Steel pickling
– Scrubbing towers
– Ion exchange regeneration
– Plating baths
– Rinse water
– Caustic metal cleaning
– Textile measurements
– Oleum measurements
– CIP skids
– Acid and base concentration
2.6
Use in Ex zones
Attention!
For an installation in Ex zones please read the guidelines
following hereafter:
Ex classification ATEX:
Number of the test certificate:
SEV 15 ATEX 0123X
IECEx SEV 15.0011X
CML 22 UKEX 2186X
Ex classification FM approved:
Designation and number of the declaration:
Project ID: 3021227
FM certificate number: F M16US0034X
InPro 7250 Series
Printed in Switzerland
1258
II 1/2G Ex ia IIC T6...T3 Ga/Gb
IS/I,II,III/1/ABCDEFG/T6 Ta = 60 ºC
2503
FM18CA0021X
© 10 / 22 METTLER TOLEDO
52 002 799 H
9