12
2.8
Ex classification FM approved
2.8.1
Introduction
The following FM control drawing and the standards
listed in section 2.8.4 must be observed, where appli-
cable:
2.8.2
Rated data
For rated data please observe section 2.7.2
2.8.3
Special conditions
In type of protection intrinsically safe apparatus, the an-
alytical probes (InPro 7000 Series) equipment is desig-
nated with the following specific conditions of use.
1. Process temperature no greater than +130 ºC.
2. Maximum permissible working pressure is 15 barg
3. Potential Electrostatic Charging Hazard – To prevent
InPro 7250 Series
Printed in Switzerland
(218 psig).
the risk of electrostatic sparking, the non-metallic
surface should only be cleaned with a damp cloth.
InPro 7250 Series
© 10 / 22 METTLER TOLEDO
52 002 799 H