InPro 7250 Series
Notes:
– The sensors of the InPro 7250 Series are marked
Warning!
Incorrect O-ring position or a damaged O-ring could
result in process leakage, causing injury to personnel.
Recommended
Not recommended!
Air entrapment
Figure 3:
Installation examples of the InPro7250 sensor
InPro 7250 Series
Printed in Switzerland
with an arrow, which indicates the flat (upstream)
face of the sensor, for correct installation in a pipe or
a tank. The marking is at the upper end of the sensor
mounting thread (see Figure 2).
Solid deposits
© 10 / 22 METTLER TOLEDO
52 002 799 H
17