1.4 IDENTIFICATION
Each single piece of equipment, is equipped with an identification
plate (15 Fig. 2), which bears:
- CE Mark
- Manufacturers mark;
- Name, company name and address of the Manufacturer;
- Type of machine;
- Registration of the machine;
- Year of manufacture
- Mass, in Kilograms.
This information must always be quoted whenever assistance
or spare parts are required.
fig. 1
cod. 19502170
USE AND MAINTENANCE
1.5 HANDLING
When moving the machine, raise it and hook it to the special
couplings (fig. 1) using a forklift with a capacity of at least 5 tons.
As this operation is dangerous, it must be carried out by trained,
responsible personnel. The machine weight is shown on the
identification label (15 fig. 2).
Stretch the cable to level the machine.
The hooking points are shown by the graphic "hook" symbol (8
Fig. 3).
g
ENGLISH
33