Rated Data; Special Conditions - Mettler Toledo InPro 6950 Serie Bedienungsanleitung

InPro 6950 Series O

2.8.2 Rated data

For rated data please observe section 2.7.2.

2.8.3 Special conditions

In type of protection intrinsically safe apparatus, the
analytical probes (InPro 6000 Series with InFit 76X/Y
and InTrac 7XX/YY Series housings) equipment is
designated with the following specific conditions of
use.
1. The dissolved oxygen sensor shall be installed in
compliance with the enclosure, mounting, spac-
ing and segregation requirements of the ultimate
application, including a tool removable cover, and
is suitable for use with FM Approved InFit 76X/Y
and InTrac 7XX/YY Series housings.
2. Process temperature no greater than +130 ºC.
3. Maximum permissible working pressure is
12 barg (174 psig).
4. Potential Electrostatic Charging Hazard –
To prevent the risk of electrostatic sparking, the
non-metallic surface should only be cleaned with
a damp cloth.
5. Enclosures containing titanium constitute a poten-
tial risk of ignition by impact or friction. Care must
be taken into account during installation and use
to prevent impact or friction.
© 02 / 2023 METTLER TOLEDO
Printed in Switzerland
Sensor 12 mm
2
13
InPro 6950
52 206 137 F