Connection; Connecting The Inpro 6950 To A Vp Cable; Connecting The Vp Cable To The Transmitter - Mettler Toledo InPro 6950 Serie Bedienungsanleitung

InPro 6950 Series O
4.2

Connection

4.2.1 Connecting the InPro 6950 to a VP cable

h
The sensor is connected to the transmitter via a VP
cable. The VP cable ensures a secure connection
between the transmitter and the sensor under harsh
industrial conditions. The robust watertight IP 68 con-
nector housing guarantees maximum process safety.
Do not touch the sensor at the VP connector plug!
To connect the VP cable to the sensor align the slit of
the VP connector with the pin in the plug. Then tightly
screw the plug to fasten the two parts.

4.2.2 Connecting the VP cable to the transmitter

h
Note: Cable assignment can be found in the
METTLER TOLEDO VP cable instruction manual.
h
Note: For connecting the cable to the terminals of
the transmitter, please refer to the instructions given in
the METTLER TOLEDO transmitter manual.
© 02 / 2023 METTLER TOLEDO
Printed in Switzerland
Sensor 12 mm
2
VP-6 Cable for
Standard Use
Plug
Pin
Slit
VP-Connector
O Transmitter
2
VP Cable
19
InPro 6950
52 206 137 F