Changing Of The Washing Programme - Pkm WA8-1415AI Bedienungsanleitung

NOTICE! Never open the door as described above when the appliance
operates normally.
NOTICE! Any damage to the appliance and / or the door caused by
forcible opening of the door are not subject to the guarantee or the
warranty!

5 .5 Changing of the washing programme

公 You can cancel a washing programme that is currently running and set a new
washing programme.
1 . Switch off the appliance using the « O
cancelled.
2 . Switch on the appliance again using the « O
3 . Set the programme « S
0 - -
« / » using the « S
THE SPIN SPEED
If spin speed «
cancelled. Before the programme ends, the appliance drains the water only.
4 . Press the « S
TART
5 . When the washing programme is finished, an acoustic signal sounds ( if the
acoustic signal is activated / s. also chapter 5 . 3 . 5 A
6 . Switch off the appliance using the « O
cancelled.
7 . Switch on the appliance again using the « O
8 . Set the desired new washing programme using the rotary knob ( 1 ) .
9 . The information indicator of the
washing programme ( hours and minutes)
10. Additionally, further functions such as temperature, spin speed, delay, etc. can be
selected by pressing the corresponding buttons (s. chapter 5.3 S
ADDITIONAL FUNCTIONS
go on.
» using the rotary knob and set the spin speed to
PIN
» -
PEED BUTTON
.
0 - -
/ » has been selected, the final spinning cycle will be
/ P » -
AUSE BUTTON
et seq.). The corresponding operational status indicators
/ O » -
N FF
/ O » -
N FF
(4): see also chapter 5.3.2 S
(7) to start the programme « S
COUSTIC SIGNAL
/ O » -
N FF
/ O » -
N FF
( A) indicates the duration of the set
DISPLAY
.
4 1
~ ~
131
(8). All settings are
BUTTON
( 8 ) .
BUTTON
ELECTION OF
PIN
) .
( 8 ) . All settings are
BUTTON
( 8 ) .
BUTTON
ELECTION OF THE
» .