Installation; Removing Of The Shipping Bolts - Pkm WA8-1415AI Bedienungsanleitung

1 6 . Remove all fluffs before operating the appliance.
1 7 . Do not overload the appliance.
1 8. The room temperature must be higher than + 0 ° C when operating
the appliance, otherwise the normal operation of the appliance will
be affected.
1 9 . Clean the appliance and its components regularly .
2 0 . Prewash programmes / prewash cycles are depending on the model
of the appliance and are not available for all models of washing
machines.
2 1 . The maximum capacity of the appliance is 8 . 0 0 kg .
2 2 . The air vents of the appliance or its built- in structure ( if the appliance
is suitable for being built- in) must be completely open, unblocked and
free of any kind of dirt.
23. The rating plate must not be removed or made illegible, otherwise
all terms of the warranty become invalid!

The manufacturer and distributor are not responsible for any damage or
injury in the event of failure to comply with these instructions.

2 . Installation

WARNING! Remove the safety bolts before initial use (see chapter 2.3
R
EMOVING OF THE SHIPPING BOLTS
severe injury to persons and/ or severe damage to the appliance.
IMPORTANT INFORMATION: the installation of this appliance must be
carried out by a person experienced in such work.
the following chapters ( 2 . Installation et seq. ) are intended for such a
person. The manufacturer is not liable for any damage caused by
improper installation.
SAVE THESE INSTRUCTIONS.
) ; otherwise, the appliance may cause
~ ~
91
2 7
The instructions in