Error Codes - Pkm WA8-1415AI Bedienungsanleitung

9.2 Error codes

E
RROR CODE
E 1
Problems with
the water
inlet.
E 2
Problems with
the water
outlet.
P
OSSIBLE CAUSE
1 . The water tap is closed.
2 . The water pressure is too
low.
3. The water inlet hose is
frozen.
4 . The filters are blocked.
1 . The « S / P
TART
button is pressed. The
appliance is in pause
mode.
2 . The water drain hose is
installed too high.
3 . The water drain hose is
frozen.
4 . The water drain hose is
blocked.
5 . The water discharge is
blocked.
6 . The drain pump filter is
blocked.

If the problems cannot be solved, switch off and unplug the
appliance, close the water tap and contact the aftersales
service.
1 . The door is not closed
properly.
( )
S
1 . Open the water tap.
2 . Wait some time.
3. Defrost the water inlet hose.
4 . Remove the filters and clean
them.
» - 1. Press the « S
AUSE
button again to restart the
washing programme.
2 . The max. installation height is
100 cm.
3 . Defrost the water drain hose.
4 . Remove the blockage and clean
the water drain hose.
5 . Remove the blockage and clean
the water discharge.
6 . Remove the drain pump filter
and clean it.
1 . Close the door properly.
~ ~
151
M ( )
EASURE S
/ P
TART AUSE
» -