Removing Of The Shipping Bolts - Pkm WA8-1415AI Bedienungsanleitung

9. Install the appliance on a level, dry and solid floor. Check the correct installation
with a bubble level.
1 0 . If you install the appliance on a wooden floor, you must also place it on a
plywood panel (60.00*60.00 cm) at least 3.00 cm thick to distribute the weight
of the appliance. Fix and secure the plywood panel properly to the wooden floor.
1 1 . All required installations for the electric and water supply must be carried out by
a qualified professional.
1 2 . Connect the appliance to the mains properly.
1 3 . The nameplate is situated at the back of the appliance.

2 .3 Removing of the shipping bolts

NOTICE! Remove the shipping bolts before the initial use of the
appliance. Otherwise, the appliance may be damaged irreparably. RISK
OF DAMAGE!
1. The shipping bolts (A) are on the back of the appliance (s. fig. below).
A
H
OW TO REMOVE THE SHIPPING BOLTS
~ ~
93