Connection Of The Water Drain Hose - Pkm WA8-1415AI Bedienungsanleitung

2 . Attach the straight end of the water inlet hose to
the appropriate water connection ( s. fig. on the
right).
3 . Put the other end of the water inlet hose into a
bucket or into another suitable container (s. fig on
the right) and open the water tap to flush foreign
substances ( e. g., dirt, sand, etc.) out of the water
pipe and of the hose. Check the water temperature.
4 . Ensure that the rubber washer
connector. Attach the curved end of the water
inlet hose to the inlet valve of the washing machine
(1 / s. fig. on the right). Tighten the water inlet hose
firmly (clockwise) to avoid leakage (2 /s. fig. on the
right).
NOTICE! Do not overtighten the water inlet hose. Overtightening of the
water inlet hose can damage the water inlet valve.
NOTICE! After the installation of the water supply and wastewater disposal
as well as before the first operation, all water hose connections – even on
the appliance itself – must be checked for leakage. The manufacturer is
not liable for any damage caused by improper installation.

2.6 Connection of the water drain hose

The water drain hose must be installed at a height of at least 6 5 cm and at most
3 1 is in the valve
~ ~
97
Fig similar