Safety Instructions (Warning Notes); Classification Of Hazards - Optimum OPTigrind GU 30S Betriebsanleitung


explains the meaning and use of the warning notes included in these operating instructions,

defines the intended use of the grinding machine,

points out the dangers that might arise for you or others if these instructions are not
observed,

informs you about how to avoid dangers.
In addition to these operating instructions, please observe

the applicable laws and regulations,

the statutory provisions for accident prevention,

the prohibition, warning and mandatory signs as well as the warning notes on the grinding
machine.
Always keep this documentation close to the grinding machine.
1.1

Safety instructions (warning notes)

1.1.1

Classification of hazards

We classify the safety warnings into different categories. The table below gives an overview of
the classification of symbols (ideogram) and the warning signs for each specific danger and its
(possible) consequences.
Symbol Alarm expression
DANGER!
WARNING!
CAUTION!
ATTENTION!
INFORMATION
In case of specific dangers, we replace the pictogram with
general danger
EN GU30S
24
Impending danger that will cause serious injury or death to people.
A danger that can cause serious injury or death.
A danger or unsafe procedure that can cause personal injury or damage
to property.
Situation that could cause damage to the grinding machine and product,
as well as other types of damage.
No risk of injury to persons.
Practical tips and other important or useful information and notes.
No dangerous or harmful consequences for people or objects.
with a warning of
injury to hands,
Translation of original instruction
Definition / consequence
hazardous electrical
voltage,
rotating parts.
Safety
Version 1.0.2 - 2021-03-10