Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
2
Technical specification
Electrical connection
Motor power
Speed ( 50 Hz ) [ rpm ]
Speed ( 60 Hz ) [ rpm ]
Grinding wheel [mm]
Grinding speed of grinding wheel ( 50 Hz ) [ m/s ]
Grinding speed of grinding wheel ( 60 Hz ) [ m/s ]
Grinding speed of belt sander ( 50 Hz ) [ m/s ]
Grinding speed of belt sander ( 60 Hz ) [ m/s ]
Length of sanding belt/ -width [mm]
Suction connection on grinding wheel
Suction connection on belt sander
Machine weight [kg]
Shaft diameter [mm]
Grinding wheel bore diameter [mm]
3
Delivery, interdepartmental transport and unpacking
CAUTION!
Injuries caused by parts falling over or off a forklift, pallet truck or transport vehicle. Only
use means of transport that can carry the total weight and are suitable for it.
3.1
Notes on transport, installation and unpacking
Improper transport of individual devices and minor machines, unsecured devices and minor
machines stacked on top of each other or next to each other in packed or already unpacked
condition is accident-prone and can cause damage or malfunctions for which we do not grant
any liability or guarantee.
Transport the scope of delivery secured against shifting or tilting with a sufficiently dimen-
sioned industrial truck to the installation site.
3.1.1
General risks during internal transport
CAUTION: DANGER OF TIPPING!
The device may be lifted unsecured by a maximum of 2cm.
Employees must be outside the danger zone, the reach of loads. Warn employees and, if
necessary, advise employees of the hazard.
Act responsibly during transport and always consider the consequences. Refrain from daring
and risky actions.
Gradients and descents (e.g. driveways, ramps and the like) are particularly dangerous. If such
passages are unavoidable, special caution is required.
Technical specification
Version 1.0.2 - 2021-03-10
Work area
Translation of original instruction
3x 400V ~50Hz ( 60 Hz )
2.2 kW
1450
1740
Ø 300 x 50
1190 x 100
Ø 35 and Ø 50
Ø 30
Ø25
Ø75
Keep a work area of at least one metre around the machine
free for operation and maintenance.
22
27
10
12
61
GU30S
EN
31
Werbung
Inhaltsverzeichnis
