Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Check the new grinding wheel for visible damage prior to assembly.
Shaft nut
Drive shaft
5
Maintenance
5.1
Inspection and maintenance
INFORMATION
The bearing is lifetime-lubricated. It is not necessary to lubricate it again.
5.2
Cleaning
Even if a suction device is used, it is necessary to clean the grinding machine regularly from
deposited grinding residues in the interior.
5.3
Repair
Optimum Maschinen Germany GmbH accepts no liability nor does it guarantee against damage
and operating malfunctions resulting from failure to observe these operating instructions.
Use only perfect and suitable tools, only original spare parts or serial parts expressly approved
by Optimum Maschinen Germany GmbH for repairs.
6
Appendix
6.1
Copyright
This document is protected by copyright. All derived rights are reserved, especially those of
translation, re-printing, use of figures, broadcast, reproduction by photo-mechanical or similar
means and recording in data processing systems, either partial or total.
Subject to technical changes without notice.
Maintenance
Version 1.0.2 - 2021-03-10
Retaining washer
Thrust washer
Translation of original instruction
GU30S
EN
39
Werbung
Inhaltsverzeichnis
