Probe Box - Rohde & Schwarz R&S Rt-Zs60 Bedienungsanleitung

®
R&S RT-ZS60
Special accessories for signal socket
The signal socket of the R&S RT-ZS60 has a special design to ensure opti-
mal performance. The signal socket is not compatible to standard accesso-
ries based on 0.64 mm (25 mil) square pins or 0.8 mm (35 mil) round pins.
Use only special accessories for R&S RT-ZS60 provided by Rohde &
Schwarz.
1.3.2

Probe Box

The probe box connects the probe and the oscilloscope via the Rohde & Schwarz
probe interface. The Rohde & Schwarz probe interface contains a male precision
7 mm (276 mil) BNC connector and six pogo pin connectors. This interface pro-
vides the required supply voltage and is also used for simultaneously transmitting
analog signals and digital data. All the analog voltages required by the probe are
generated in the probe box. This approach ensures that it will be possible to oper-
ate future probes on any base unit that features a Rohde & Schwarz probe inter-
face.
User Manual 1418.7342.02 ─ 02
Description of the Probe
(1) Rohde & Schwarz probe interface with
7 mm (276 mil) coaxial connector and 6 pogo
pins
(2) Release knob
Product Description
9