Rohde & Schwarz R&S RT-ZS60 Bedienungsanleitung Seite 73

®
R&S RT-ZS60
● Measurement range ±8 V + offset compensation setting. Maximum measure-
ment accuracy is achieved when offset compensation is switched off.
● High measurement accuracy and low temperature sensitivity, typically 0.1% of
reading over the entire temperature range.
The R&S ProbeMeter enables the ground-referenced measurement of voltages.
A difference in the ground levels of oscilloscope and DUT can cause an unwan-
ted zero error. Should this happen, use the AutoZero function (refer to
ter 2.1.3, "AutoZero",
User Manual 1418.7342.02 ─ 02
on page 18).
Putting into Operation
R&S ProbeMeter
chap-
22