Cleaning; Calibration Interval - Rohde & Schwarz R&S Rt-Zs60 Bedienungsanleitung

Inhaltsverzeichnis

R&S

RT-ZS60

5.3

Cleaning

To clean the exterior of the probe, use a soft cloth moistened with either distilled

water or isopropyl alcohol. Before using the probe again, make sure to dry it com-

pletely.

Instrument damage caused by cleaning agents

Cleaning agents contain substances that may damage the instrument; for

example, solvent may damage the labeling or plastic parts.

Never use cleaning agents such as solvents (thinners, acetone, etc.), acids,

bases or other substances

5.4

The recommended calibration interval for R&S RT-ZS60 active voltage probe is

two years. For servicing, send the probe to your nearest Rohde & Schwarz ser-

vice center (see

User Manual 1418.7342.02 ─ 02

chapter 5.2, "Returning the Probe for

Maintenance and Service

Servicing",

on page 40).

Cleaning

Inhaltsverzeichnis