Accessories And Items - Rohde & Schwarz R&S Rt-Zs60 Bedienungsanleitung

®
R&S RT-ZS60
Risk of interface damage
Make sure to connect the probe only to a base unit or an adapter having a
Rohde & Schwarz interface. Do not connect the probe to a commercially
available BNC jack, as this can cause irreparable damage to the interface.
From the outside, the 7 mm coaxial connector looks like a standard BNC
connector. However, it is constructed differently and is capable of a signifi-
cantly higher frequency limit.
1.4

Accessories and Items

The figure below shows all accessories that are available for the R&S RT-ZS60
active voltage probe.
marker band kit
signal pin, solder in
Fig. 1-1: Available accessories
User Manual 1418.7342.02 ─ 02
ground pin, pogo
ground pin, solder in
signal adapter, square pin
signal pin
Accessories and Items
lead,
15 cm / 5.9 in
lead
6 cm / 2.4 in
ground adapter,
square pin
Product Description
mini clip
micro clip
10