Error Message In The Display - hanseatic MC-IF6417B1-A Gebrauchsanleitung

Page EN-28 Troubleshooting
WARNING!
The appliance operates with dangerous mains voltages. Improper use, faulty electri-
cal installation or excessive mains voltage may result in an electric shock or short-cir-
cuiting.
■ Never try to repair a defective or suspected defective appliance yourself. You can
put your own and future users' lives in danger. Only authorised specialists are al-
lowed to carry out this repair work.
■ Do not continue to cook if there are cracks in the glass ceramic hob. Water that
runs through cracks inside the glass ceramic hob may be live! If there are cracks in
your glass ceramic hob, disconnect the appliance from the power supply (remove
the fuse) to prevent a possible electric shock and call our service center (see "Ser-
vice" on page EN-29).

Error message in the display

Error code
F3–F8
F3–FE
E1/E2
E3/E4
E4/E5
Possible solutions / tips
The temperature sensor is not working. Please call our service
center (see "Service" on page EN-29).
The temperature sensor of the IGBT is not working. Please call our
service center (see "Service" on page EN-29).
Wrong mains voltage. Disconnect the appliance from the power
supply and check that the mains voltage is correct. Only switch the
power supply back on when the mains voltage is again normal.
Wrong temperature. Inspect the cookware.
Wrong heating temperature in the cooking zone. Allow the cooking
zone to cool down and then switch it back on.