WARNING!
The hob works with 230 V mains voltage. Improper use, faulty electrical installation or ex-
cessive mains voltage may result in an electric shock or short-circuiting.
Never try to repair a defective or suspected defective appliance yourself. You can put your
■
own and future users' lives in danger. Only authorised specialists are allowed to carry out
this repair work.
If these tips were not helpful, please contact our Customer Service.
Error message in the display
Error code
Problem
E1 / E2
Error or open circuit on the temper-
ature sensor of the ceramic plate.
E3
The hob is overheating.
E4 / E5
Error or open circuit on the temper-
ature sensor of the electronics.
E6
The electronics are overheating.
E7
The mains voltage is too low.
E8
The mains voltage is too high.
EB
Error on the temperature sensor of
the ceramic plate.
Troubleshooting
Solution
Contact our customer service.
Switch off the cooking zone and let it cool down be-
fore you switch it back on again.
Contact our customer service.
Switch off the cooking zone and let it cool down be-
fore you switch it back on again.
Ensure that the hob is operated with a voltage of
230 V ~ / 50 Hz.
Contact our customer service.
Page GB-17