Dimmer Curves; System Info - Cameo F2 D IP Bedienungsanleitung

Dimmer curves

linear
DMX value
SYSTEM INFORMATION (System Info)
Press the encoder to access the main menu. Rotate the encoder to select the menu item System
info (left arrow) and confirm by pushing the encoder. This will take you to the submenu for select-
ing the submenu items (see table, rotate the encoder to select and push the encoder to confirm
selection). Now select the arrow symbol for back at the top of the submenu. Push the encoder
and access the main menu in the same way to return to the main display. The main display is
activated automatically if no input is made within approximately 30 seconds.
-------------- Menu --------------

DMX Address
DMX Mode
Stand Alone
Slave
Settings

System Info

System Info
Firmware = Displays device
Temperature = Displays temperature
Operation = Displays operating
Hours
18
exponential
DMX value
firmware
of LED unit
time
logarithmic
DMX value
Main CPU Vx.xx
Back
LED xx °C / xx °F
Unit °C (= display in degrees Celsius)
°F (= display in degrees Fahrenheit)
xx:xx h Displays total operating time in hours
and minutes
S-curve
DMX value