8.
Maintenance
8.1
Service Notes
The
Lub-O-Mat
operating condition.
To maintain it in this condition and ensure safe operation, the user must observe the advice
and warnings contained in these operating instructions.
As a basic precaution, ensure that the unit is not connected to the mains and is not under
ATTENTION
pressure before undertaking any maintenance or repair work. An operational test should
be carried out after changing any parts.
Any maintenance work performed while the unit is live should be carried out only by
CAUTION
qualified personnel.
8.2
Maintenance
The following points in particular should be checked when carrying out maintenance work on
the
Lub-O-Mat
•
Condition of the fresh water delivery line and the metering line
•
Furring and dirt deposits
•
Tight-sealing of all parts carrying water or conveyor track lubrication
•
Whether the required metering performance is being maintained
•
Operation of pump display elements
In the event of a fault, refer to chapter
417101637_Lub-O-Mat
metering units have been tested and left the factory in perfectly safe
metering units:
9
"Troubleshooting".
- 44 -
Rev. 03-07.12