Es Statement Of Compliance - HERON 8896317 Bedienungsanleitung

XV. ES Declaration of Conformity
Manufacturer: Madal Bal a.s. Bartošova 40/3, CZ-760 01 Zlín • Company ID No.: 49433717
that the described product listed above is in conformity with relevant harmonisation legal regulations of the European Union:
This declaration is issued under the exclusive responsibility of the manufacturer.
Harmonisation norms (including their amendments, if any exist),
which were used in the assessment of conformity and on the basis of which the Declaration of conformity is issued:
EN 61000-3-3:2013; EN IEC 63000:2018, EN ISO 3744:2010, ISO 8528-10:1998;
The technical documentation 2006/42 ES, 2000/14 ES was drawn up by Martin Šenkýř
at the address of Madal Bal , a.s., Průmyslová zóna Příluky 244, 760 01 Zlín, Czech Republic.
The Technical Documentation (2006/42 ES, 2000/14 ES) is available at the above address of Madal Bal, a.s.
1282 Ente Certificatione Macchine Srl, Via Ca´ Bella, 243- Loc. Castello di Serravalle-40053 Valsamoggia (BO) Italy.
Measured acoustic power level of the equipment representing the given model, uncertainty K:
Guaranteed emission level of acoustic power of the equipment (2000/14 ES):
EU approval of internal combustion engine models for limit exhaust fume emissions
Place and date of issue of ES Declaration of Conformity: Zlín 05.09.2022
Person authorised to write up the ES Declaration of Conformity on behalf of the manufacturer
EN
Subject of declaration - model, product identification:
HERON® 8896317 (2.5 kW/Max. 2.8 kW)
HERON® 8896318 (5.0 kW/Max. 5.5 kW)
HERON® 8896319 (1.9 kW 230 V/5.0 kW 400 V)
hereby declares
2006/42 ES; (EU) 2011/65; (EU) 2014/30; 2000/14 ES; (EU) 2016/1628;
EN ISO 8528-13:2016; EN ISO 12100:2010; EN IEC 61000-6-1:2019;
EN IEC 61000-6-3:2021; EN IEC 61000-3-2:2019; EN 55012:2007;
Conformity assessment procedure (2006/42 ES, 2000/14 ES)
Verification of the individual products by the notified entity no.:
see table 1 - technical specifications
see table 1 - technical specifications
according to (EU) 2016/1628 (see rating label on the generator)
(signature, name, function)
Martin Šenkýř
Member of the Board of the manufacturer
Generator
138