I. Description - Purpose Of Use Of The Generator - HERON 8896317 Bedienungsanleitung

I. Description – purpose of use of the generator
The generator is intended for powering electrical devices in locations where mains power is not available
or as a backup electrical power source for powering TN-C-S (TN-C) power grids (i.e. permanent electrical
wiring in apartments, houses, etc.) after being connected by an electrician with the necessary professio-
nal qualifications. The generator may be connected to a TN-C-S (TN-C) power grid only via overvoltage
protection that is built into the electrical grid. The AVR system balances out the output voltage and it is possible to
use it for powering sensitive electrical devices under the correct use conditions that are specified in chapter VI.
Connecting electrical devices and generator load-capacity. Models 8896318 and 8896319 have rubber wheels
and handles for moving the generator to the required location.
V
y Models 8896318 and 8896319 are equipped with a socket for recharging 12 V car batteries.
117
The generator must be powered using propane-butane from a standard
propane-butane pressure vessel that is used for powering, for example, gas
stoves with the use of a pressure regulator for these types of pressure vessels,
using petrol or natural gas under the condition that the prescribed supply
pressure and flow rate is met, see chapter Technical specifications (chap. II).
Electric start-up for comfortable push button starting (powered from a battery).
The generator can also be started using a manual pull starter if the battery is flat.
The generators are equipped with a digital counter of total operational hours from the
first start, operational hours from the previous start, current voltage and frequency,
with the values shown on the display.
EN