Es Statement Of Compliance - HERON 8896430 Bedienungsanleitung

XVI. ES Declaration of Conformity
Subject of declaration - model, product identification:
Generator
HERON® 8896430
(Operating power output: 10 kW/Max. 11 kW)
Manufacturer: Madal Bal a.s. Bartošova 40/3, CZ-760 01 Zlín • Company ID No.: 49433717
hereby declares
that the described product listed above is in conformity with relevant harmonisation legal regulations of the European
Union:
2006/42 ES; (EU) 2011/65; (EU) 2014/30; 2000/14 ES; (EU) 2016/1628;
This declaration is issued under the exclusive responsibility of the manufacturer.
Harmonisation norms (including their amendments, if any exist),
which were used in the assessment of conformity and on the basis of which the Declaration of conformity is
issued:
EN ISO 8528-13:2016; EN ISO 12100:2010; EN IEC 61000-6-1:2019;
EN IEC 61000-6-3:2021; EN IEC 61000-3-2:2019; EN 55012:2007;
EN 61000-3-3:2013; EN IEC 63000:2018, EN ISO 3744:2010, ISO 8528-10:1998;
The technical documentation 2006/42 ES, 2000/14 ES was drawn up by Martin Šenkýř at the address of Madal Bal , a.s.,
Průmyslová zóna Příluky 244, 760 01 Zlín, Czech Republic
The Technical Documentation (2006/42 ES, 2000/14 ES) is available at the above address of Madal Bal, a.s. Conformity as-
sessment procedure (2006/42 ES, 2000/14 ES)
Verification of the individual products by the notified entity no.:
0158 DEKRA Testing and Certification GmbH Handwerkstraße 15, 70565 Stuttgart, Germany.
Measured acoustic power level of the equipment representing the given model, uncertainty K:
94.21dB(A); K = ±2.5 dB(A)
Guaranteed emission level of acoustic power of the equipment (2000/14 ES): 97 dB(A)
EU authorisation of combustion engines types at the threshold exhaust gas emission values
according to (EU) 2016/1628 (see label on the pressure cleaner and stamp on the engine)
Place and date of issue of ES Declaration of Conformity: Zlín 8. 7. 2019
Person authorised to write up the EU Declaration of Conformity on behalf of the manufacturer
(signature, name, function)
Martin Šenkýř, Member of the Board of the manufacturer
EN
126