HERON 8896317 Bedienungsanleitung Seite 126

y To illustrate power input under very intensive loads, the task
of "grinding asphalt" with a wire cup brush was selected
since it results in high friction, which increases power input.
y In table 3, for the purpose of comparison of power input
with larger angle grinders, for illustration angle grinders
Extol® Premium 8892021 and Extol® Craft 403126 were used
with a braided cup brush of diameter 85 mm, which is,
OVERVIEW OF POWER INPUTS ON OTHER ELECTRIC POWER TOOLS
AND THE MINIMUM REQUIRED ELECTRICAL POWER OUTPUT OF THE GENERATORS
COMPRESSORS
Two-cylinder compressor Extol® Craft 418211
(2 200 W, pressure vessel 50 l)
y Starting power input and current: 2800 W; 12.3 A
y Power input when pressurising the vessel at a pressure of 3 bar: 1900 W
y Power input when pressurising the vessel at a pressure of 8 bar: 2270 W
y Power input when grinding with a pneumatic random orbital sander: 2200 W
(equilibrium pressure of 4 bar)
Single-cylinder compressor Extol® Craft 418210
(1 500 W, pressure vessel 50 l)
Oil free compressor Extol® Craft 418101
(1 100 W)
HIGH PRESSURE WASHERS
High pressure washer Extol® Premium 8895200
(1800 W, max. 140 bar)
y Starting/operating power input: 1630 W/1500 W
High pressure washer Extol® Industrial 8795200
(3 000 W, max. 180 bar)
y Starting/operating power input: 2650 W/2550 W
MITRE AND CIRCULAR SAW
Circular saw Extol® Premium 8893003
(1 200 W,
∅ 185 mm)
y Starting power input with saw blade: 1524 W
y Operating power input with saw blade without load: 630 W
y Operating power input when cutting wood: 809 W
Mitre saw Extol® Craft 405425
(1 800 W,
∅ 250 mm)
y Starting power input with saw blade: 1396 W
y Operating power input with saw blade without load: 1132 W
y Operating power input when cutting wood: 1420 W
ANGLE POLISHER
Angle polisher Extol® Industrial 8792500
(1 400 W, 180 mm)
∅
y Starting power input: 542 W
y Operating power input under intensive load: 842 W
THERMAL POWER TOOLS
Plastic pipe welder Extol® Craft 419311
(1 800 W)
Heat gun
(2 000 W)
EN
nevertheless, too heavy for these angle grinders and it is not
permitted to use these angle grinders with this brush as this
would result in damage to the angle grinder. These angle
grinders must be used with cup brushes of diameter 65 mm.
y Table 4 then shows an overview of the specified power
inputs on other electric power tools.
Minimum electrical power output of the generator
Generator HERON® 8896413
(5.0 kW; Max. 5.5 kW)
y HERON® 8896140 (3.0 kW; Max. 3.5 kW) can not be used
Generator HERON® 8896416
(2.5 kW; Max. 2.8 kW)
y HERON® 8896411 (2.0 kW; Max. 2.3 kW) can not be used
Digital generator HERON® 8896217
(1.6 kW; Max.2.0 kW)
Minimum electrical power output of the generator
Digital generator HERON® 8896217
(1.6 kW; Max.2.0 kW)
Generator HERON® 8896413
(5.0 kW; Max. 5.5 kW)
y HERON® 8896140 (3.0 kW; Max. 3.5 kW) can not be used
Minimum electrical power output of the generator
Digital generator HERON® 8896217
(1.6 kW; Max.2.0 kW)
Digital generator HERON® 8896217
(1.6 kW; Max.2.0 kW)
Minimum electrical power output of the generator
Digital generator HERON® 8896216
(0.9 kW; Max. 1.0 kW)
Minimum electrical power output of the generator
Generator HERON® 8896411
(2.0 kW; Max. 2.3 kW)
Generator HERON® 8896411
(2.0 kW; Max. 2.3 kW)
Table 4
126