Opening The Battery/Fuse Compartment - VOLTCRAFT VC272 Bedienungsanleitung

14.3 Opening the battery/fuse compartment

The battery/fuse compartment cannot be opened when the
leads are connected to the terminals.
All terminals are automatically locked when the battery/
fuse compartment is opened to prevent leads from being
inserted.
Follow the steps below to open the battery/fuse compartment:
1. Disconnect all test leads from the multimeter and switch
the multimeter off.
2. Loosen and remove the battery compartment screw on the
back of the multimeter.
3. Collapse the fold-out stand and slide the battery/fuse com-
partment cover off the bottom of the multimeter.
You should now be able to access the fuses and the
Æ
battery.
4. Repeat the above steps in the reverse order to replace the battery/fuse compart-
ment cover, and then screw it in place.
The multimeter is now ready to use.
Æ
85