General Information - Hilti DCG 230-D Bedienungsanleitung

ORIGINAL OPERATING INSTRUCTIONS
DCG 230 D / DAG 230 D angle grinder
It is essential that the operating instruc-
tions are read before the power tool is op-
erated for the first time.
Always keep these operating instructions
together with the power tool.
Ensure that the operating instructions are
with the power tool when it is given to
other persons.
Contents

1. General information

2. Description
3. Insert tools, accessories
4. Technical data
5. Safety instructions
6. Before use
7. Operation
8. Care and maintenance
9. Troubleshooting
10. Disposal
11. Manufacturer's warranty - tools
12. EC declaration of conformity
1. General information
1.1 Safety notices and their meaning
DANGER
Draws attention to imminent danger that will lead to
serious bodily injury or fatality.
WARNING
Draws attention to a potentially dangerous situation
that could lead to serious personal injury or fatality.
CAUTION
Draws attention to a potentially dangerous situation
that could lead to slight personal injury or damage to
the equipment or other property.
Printed: 22.04.2013 | Doc-Nr: PUB / 5069494 / 000 / 00
1 These numbers refer to the corresponding illustra-
tions. The illustrations can be found on the fold-out
cover pages. Keep these pages open while studying
the operating instructions.
In these operating instructions, the designation "the
power tool" always refers to the DCG 230 D or
DAG 230 D angle grinder.
Parts, operating controls and indicators 1
@
Clamping nut
;
"Kwik-Lock" clamping nut (optional)
=
Cutting disc
%
Page
Clamping flange
&
19
Keying lug
(
20
Guard
)
23
Spindle
+
23
Adjusting screw
§
25
Clamping lever
/
30
Steadying rib
:
31
Threaded bushing for grip
·
33
Drive spindle lockbutton
$
33
Release lever (for pivotable grip)
£
34
Side handle
|
34
On / off switch (hold to run)
¡
35
Wrench
NOTE
Draws attention to an instruction or other useful
information.
1.2 Explanation of the pictograms and other
information
Warning signs
General
warning
Warning:
electricity
en
19