Tauro Essiccatori BIOSEC B5 Benutzerhandbuch Seite 27

BIOSEC
H O M E D E H Y D R A T O R
THE FOOD DEHYDRATOR CONSISTS OF:
1. a square plastic or steel tunnel, in which steel or plastic baskets are placed,
EN
depending on the model;
2. a removable thermal ventilation unit, which produces hot air by heating
the ambient air by means of resistance and pushing it towards the baskets
by means of a fan;
3. a moveable door closurethat hooks to the tunnel with a handle and mag-
net. The thermal ventilation unit and the door closure are equipped with
grilles to allow air to pass through but keep insects out;
4. baskets with holes in to place the material to be dried; the basket is in-
serted into the tunnel using the guide rails. The number of baskets and the
material they are made from varies according to the BIOSEC model pur-
chased.
THE ADDITIONAL SET CONSISTS OF:
1. a tunnel as in the basic large set;
2. 10 or 12 baskets (according to the model purchased).
SPECIFIC DIMENSIONS
For all sets, the outer section is 27x27 cm; the inside of the tunnel has a sec-
tion of 25x25 cm, while the length is 45 cm for the small set (B5-B5S-B6) and
82 cm for the large set (B10-B10S-B12); 82 cm for all additional sets.
Baskets in both materials – plastic and stainless steel – and are all easily
washed in a dishwasher.
The resistance is 550 Watts and power is regulated electronically.
POSITIONING THE BIOSEC
As with all electrical appliances, the BIOSEC thermal ventilation unit must not
come into contact with water or sources of steam. BIOSEC must therefore
be placed at least 60 cm away from taps, sinks and bathtubs and sheltered
from rain or any water spray.
When in operation, the BIOSEC releases humidity, which must not remain
stagnant in the surrounding environment so as not to slow down or prevent
drying. It is therefore advisable to place the BIOSEC in a room that is suffi-
ciently large or one that is able to be suitably ventilated.
Avoid damp environments such as bathrooms, laundry rooms, cellars, etc.
Make sure you always leave at least 10 centimetres of space between the
two grate openings, to allow air to circulate freely: the exclusive horizontal
flow system and the DrySet Pro electric motor guarantee excellent results,
optimising time and costs.
www.tauroessiccatori.com
27