Vieweg Quality Control QC-100 Bedienungsanleitung Seite 36

VIEWEG
To use the LAN interface, the QC-100 must be connected
to a network switch .
The QC-100 requires an IP address, which must be ente-
red manually . No DHCP!
EN
By tapping the Home button,
you will return to the main
menu .
By tapping the Next button,
you will get to the next menu
page .
Operating Manual QC-100 quality control
You can test this with the cmd . e xe on a
Windows PC .
Then type ping <devices_ip> .
(for example: ping 192 . 1 68 . 0 . 1 01)
With your browser, you can view measurement
data and results . You can access the provided
JSON file by calling port 8080 .
Enter the selected IP address followed by
<:8080>, e . g . 192 . 1 68 . 0 . 1 01:8080
After changing the language, a restart is
required . This must be done once the
notification appears on the screen .
The field "New Key" is for internal use only .
36
NOTICE