Structure and mode of operation
Measurement point 4
Measurement point 4
Fig. 5.1
Installation of the 4 SG full bridges on the circumference of the measuring
body
5.2
SG covering agent
To protect the SG the force transducers have a housing that is screwed to
gether with the loaded member. In order to retain the protective effect, the
housing must not be removed or damaged in any way.
12
Measurement
point 1
Measurement point 2
Measurement point 1
A04785_01_YCI_02 HBM: public
Full bridge strain gage
Measurement point 3
Full bridge strain gage
Measurement point 3
KDB