Veratron OCEANLINK 7 MARINE DISPLAY Bedienungsanleitung Seite 26

5. Once an item is selected it will be
highlighted in red color.
Press the UP/DOWN buttons to modify the
data displayed on that item.
See "Supported Data" for the complete list of
available data.
Once the displayed data is found, press
ENTER to confirm the selection and the item
is highlighted in green color again.
6. To customize another screen, press BACK
many times until you're back to the screen
selection described at point 2.
To quite the settings and return to normal
operation, long press the BACK button.
▲ ▼
Press or to change the data
SCREEN CONFIGURATION
A3C0090070000