Temperature Alarm - Eurochron FWS-1600 Bedienungsanleitung

100
95
Displaying minimum / maximum values
Ø
When you press the MAX / MIN button once, for 5 seconds the
75
display shows the maximum values so far recorded for
temperature inside and outside as well as air humidity.
Ø
When you press the MAX / MIN button twice, for 5 seconds
the display shows the minimum values so far recorded for
25
temperature inside and outside as well as air humidity.
Ø
5
If you hold the MAX / MIN button pressed down for 3 seconds,
all saved minimum / maximum values are deleted.
0
Operation with several external sensors:
Ø
If you are operating several external sensors (max. 3) on one
weather station, press the CHANNEL button at the front of the
main device in order to display the measurements of sensors
1, 2 and 3 in sequence. The CH window at the top left in the
segment for external temperature displays which external
sensor provided the value currently displayed. If you press
once again, the
shows you that the measurements for all sensors are
automatically being displayed one after the other for a few
seconds.
Ø
When the
outside temperature, the batteries of the sensor whose data
are currently being shown are used up. They should be
exchanged for new batteries.

Temperature alarm

100
You can set the device so that it emits an acoustic signal when the
95
temperature goes above or below certain values at the main de-
vice or
75
Ø
For this press the ALERT button for 3 seconds Now "——"
flashes, as well as the Mini/Max symbol
temperature segment.
Ø
25
Now select with the "+" button whether you wish to enter
alarm values for the inside temperature or for one of the
5
external sensors (if several are present).
0
. . .means "rising outside temperature",
. . . means "constant outside temperature",
. . . means "falling outside temperature".
symbol appears below the window and
symbol appears in the display segment for the
the external sensor.
23
23
in the indoor
100
95
75
25
5
0
100
95
75
25
5
0