Buoyancy Chamber; Ii-2-Fixing At The Front - Zodiac NZO 700 Eignerhandbuch

BUOYANCY CHAMBER – Assembling the buoyancy
chamber on the hull
3
- Repeat for the other side of the buoyancy chamber.
- Bring the buoyancy chamber forward beneath the nose of the deck.
- Once again, pull the buoyancy chamber as far aft as possible, entering the boltrope into the
mini rail at the upper aft position.
- Inflate the nose of the buoyancy chamber slightly in order to verify that it is properly
centred and marries to the hull and the deck. Restart the process if the buoyancy chamber is
not correctly positioned.
BUOYANCY CHAMBER – Fixing

II-2-Fixing at the front

4
Pass the buoyancy chamber front strap through the channel plate and adjust the
longitudinal position by tightening or relaxing the strap. The buoyancy chamber is
properly positioned when the rubber side fender embeds itself into the forward polyester
notch.
Page 22/68