Zodiac NZO 700 Eignerhandbuch Seite 96

BUOYANCY CHAMBER - Pressure
II-4-1-Inflating the buoyancy chamber
• Place the adapter corresponding to the diameter of the semi built-in valve at the inflator
hose nozzle.
Inflate the buoyancy mechanism, balancing the pressure between the different
compartments until the partitions (a) are no longer visible (pressure = 240 mb)
Never pressurise a
compartment when the
others are completely
deflated
Inflating is complete: Screw on the inflating valve caps
NOTE:
II-4-2-Pressure
The correct pressure for the buoyancy chamber is 240 mb/ 3.4 PSI
The ambient temperature of the air or
water proportionately influences the
level of internal pressure in the
buoyancy chamber
1
2
A slight air leak is normal before the valve cap is screwed on
Only the caps guarantee final air tightness.
Ambient temperature
Page 25/68
a
Buoyancy chamber
internal pressure
+1°C +4 mb / 0.06 PSI
-1°C -4 mb / 0.06 PSI
E
N
G
L
I
S
H