Buoyancy Chamber; Inflating The Buoyancy Chamber - Zodiac eOPEN 3.1 Eignerhandbuch

BUOYANCY CHAMBER – Installing the buoyancy chamber on the hull

BUOYANCY CHAMBER

BUOYANCY CHAMBER
Your boat's buoyancy chamber is made from STRONGAN DUOTEX
NEOPRNE CSM-CR 1100 Decitex, 1050 gr/m².
The maintenance recommendations are specified in VOLUME I of the owner's manual.

INFLATING THE BUOYANCY CHAMBER

INFLATOR
a. tube end
b. adaptor
c. tube base
d. inflation port
NOTE: A high capacity electric (12 V) inflator is available as an option (contact your dealer).
"EASY-PUSH" VALVES
To change position
Push
614225 -
d
Inflation position
The membrane is closed, the
plunger is up
Page 14 / 33
®
1100 Decitex, 1000 gr/m² or
c
Deflation position
The membrane is open, the
plunger is down
a
b
Edition 1