Buoyancy Chamber; Ii-1-Setting Up The Buoyancy Chamber - Main Steps; Ii-2-Inflation System - Zodiac PRO 500 Eignerhandbuch

BUOYANCY CHAMBER – Main steps
II-1-SETTING UP THE BUOYANCY CHAMBER – MAIN STEPS
When assembling the boat, it is important that you follow the procedure in the correct order. Proceed
step by step, referring each time to the pages indicated for explanations.
INFLATION PROCEDURE
1. Make an inventory of all your boat's components and
learn to recognize them
2. Start inflating the boat
using working pressure

II-2-INFLATION SYSTEM

THE INFLATION PUMP
a. adaptor
b. tube nozzle
c. tube connector
d. inflation port
SEMI FLUSH-MOUNTED VALVES
To change position
Push
The Easy push valve plugs are designed to be
screwed on or off; they alone provide final
NOTE:
In inflating position
The membrane is closed, the
knob is up
airtightness.
Page 13 / 17
PAGE SECTION
6 - 8 Inventory
Location
14 & 15 Inflating the boat
16 & 17
Air pressure
a
b
c
In deflating position
The membrane is open, the
knob is down
E
N
G
L
I
S
H
d