Buoyancy Tube - Zodiac YACHTLINE 360 Bedienungsanleitung

INFLATING THE BUOYANCY TUBE
• Place the adapter corresponding to the diameter of the semi-built in valve at the inflation
pump hose nozzle.
Inflate the buoyancy tube, balancing the pressure between the different compartments until
the partitions (a) are no longer visible (pressure = 240 mb)
Never put a compartment
under pressure while the
others are still fully
deflated.
Inflation is completed: Screw on the inflation valve plugs.
NOTE:
CORRECT PRESSURE
The correct pressure for the buoyancy tube is 240 mb/ 3.4 PSI.
The ambient temperature of the air or the
water proportionally influences the
internal pressure of the buoyancy tube:
Thus it is important to anticipate:
Check and adjust the pressure of inflatable compartments (by inflating or deflating)
depending on the temperature (particularly when temperature variations are high
BUOYANCY TUBE - PRESSURE
1
2
A slight loss of air is normal before the cap is screwed on.
Only the plugs provide final airtightness.
BUOYANCY TUBE - PRESSURE
Ambient temperature
Page 17 / 31
a
Pressure inside the

buoyancy tube

+ 1°C + 4 mb / + 0.06 PSI
- 1°C - 4 mb / - 0.06 PSI
E
N
G
L
I
S
H