Securing At The Bow - Zodiac NZO 600 Eignerhandbuch

BUOYANCY CHAMBER – Installing the buoyancy chamber on the hull
3
- Repeat for the other side of the buoyancy chamber.
- Bring the buoyancy chamber forward beneath the nose of the deck.
- Once again, pull the buoyancy chamber as far aft as possible, entering the boltrope into the
mini rail at the upper aft position.
- Inflate the nose of the buoyancy chamber slightly in order to verify that it is properly
centred and marries to the hull and the deck. Restart the process if the buoyancy chamber is
not correctly positioned.
BUOYANCY CHAMBER – Securing

SECURING AT THE BOW

4
Pass the buoyancy chamber front strap through the channel plate and adjust the longitudinal
position by tightening or relaxing the strap. The buoyancy chamber is properly positioned
when the rubber side fender embeds itself into the forward polyester notch.
Page 16/ 52